Crane Centre News
Below is the latest news headlines from the Crane Centre, click on the headlines to read the related story.
DDS Demolition Invest in FASSI F455AXP
Concerned about conforming to the new Machinery Directive? We've got it covered.
FASSI Star of the show for ITV drama
Little Pot Transport invest in FASSI
Maxi Haulage choose FASSI
Buckhurst Plant Hire Continue to invest in FASSI
CUT-UK select FASSI for new purpose-built site
MC Transport add to their existing fleet
Molson Coors take delivery of a new FASSI MICRO
Hodson Crane Hire reach new heights with FASSI
P H Lifting Services prefer FASSI!
J A Envirotanks of Birmingham invest in a new FASSI F560AXP.24 Evolution
Jim Ricketts Hiab Haulage invest in FASSI
Another service van to existing fleet
BPS choose top-seat FASSI
Bryn Thomas Crane Hire purchase best power to weight ratio
Central Electrical power-up with FASSI
Highland Access go for FASSI
Royden Engineering see the wider picture with FASSI
Veolia Environmental Services take delivery of FASSI fabulous four
SGS UK Ltd become one of only two in Europe
Silverstone Builders choose Fassi F110A.22
Hallett Silberman choose FASSI evolution
DDS Demolition Invest in FASSI F455AXP
DDS Demolition of Kent have recently put to work this FASSI F455AXP.26 fitted to a Mercedes Actros 6x4 120t tractor unit supplied by Vantruck Ltd of Ellesmere Port.
The crane will be used for a variety of applications, with the main being heavy plant & machinery. The F455AXP has continuous rotation, full remote control and hydraulically tilting outriggers. The crane will lift 9,500kg @ 3.85m and 1,895kg @ 16.75m!!
Click on the photograph to view a larger image.
Concerned about conforming to the new Machinery Directive? We've got it covered.
Following the ALLMI / HSE guidance on the delayed implementation of EN12999 A3 it is The Crane Centre & Fassi UK’s intention to specify a stabiliser interlock system on all 2010 plate cranes greater than 4t/m, to ensure conformance with the essential health & safety requirements (EHSR's) of the new Machinery Directive 2006/42/EG that came into force on 29/12/2009.
As per the previous ALLMI guidance (dated November 2009) “any machine built prior to 29/12/09 falls under the auspices of the previous version of EN12999 A2 and should not be required to conform to the requirements of A3 even if it is installed after that date”.
Fassi UK hold a limited number of 2009 plate cranes in stock which conform to EN12999 A2 & are legitimately available for sale & supply in 2010.
If you would like any further information regarding the new legislation, please do not hesitate to contact us, or go directly to FASSI UK’s website by clicking on their logo at the top of the page.
FASSI Star of the show for ITV drama
A FASSI crane has recently featured in the ITV comedy drama, “THE FATTEST MAN IN BRITAIN”.
The FASSI F455AXP.26 complete with an L214 Fly Jib and V20 winch, was used for lowering “Two Ton Tommy” into his grave.
The Crane, which was fitted by FASSI main dealer Central Crane Technicians is maintained by The Crane Centre and is owned and operated by Williams Crane Hire Ltd, is capable of lifting an impressive 540KG at 26.75M with the fly jib attached, and has full 360’ continuous rotation.
As with all FASSI Cranes in the evolution range, this model also has radio remote control as standard, ensuring complete control and ease of use for the operator at all times.
Click on the photograph to view a larger image.
Little Pot Transport invest in FASSI
Little Pot Transport of Oldbury, West Midlands have recently taken delivery of a FASSI F230AXP.24 fitted to a Scania 6x2 rigid.
This crane has a lifting capacity of 4,335kg @ 4.45m and 1,330kg @ 12.30m, The Crane Centre also constructed the body to Company Director, Julian’s exact specification, he tells us why he went for a FASSI from The Crane Centre;
“This is the first FASSI Crane in my fleet of lorry loaders. At the time of order, I was looking for a change and the FASSI crane was everything I was looking for. It offered the best power to weight ratio compared to its competitors and was also the best value for money. I’m very impressed with the quality of the body work that The Crane Centre carried out and their correspondence throughout the build helped to ensure that everything was exactly on specification. The Crane Centre and FASSI will be at the top of my list for my next investment”.
Click on the photograph to view a larger image.
Maxi Haulage choose FASSI
Maxi Haulage of Ayrshire have recently invested in a FASSI F240B.22 fitted to the rear of a Volvo FE 320 6x2 rigid vehicle.
The FASSI F240B.22 has a lifting capacity of 8,000kgs when close in at 2.60m and will lift 2,780kg at 8.05m.
The crane Centre also completed the installation of the body to Maxi’s exact specification.
This vehicle will be working out of their Wrexham depot in North Wales.
Click on the photograph to view a larger image.
Buckhurst Plant Hire Continue to invest in FASSI
Buckhurst Plant Hire has taken delivery of four FASSI F65A.23 cranes mounted to John Deere agricultural tractors. These unusual installations complement their existing FASSI fleet and the cranes have a lifting capacity of 1,660kg @ 3.80m and 585kg @ 8.75m.
FASSI main dealer The Crane Centre worked very closely with Buckhurst Plant hire, before and during the installation process to ensure that all requirements were met.
The tractors will be working in Devon on a high profile EHV contract and all of the cranes are fitted with safety devices to stop the cranes working if the stabilizers are not fully deployed.
Marketing Manager for Buckhurst Plant Hire, Lee Gansler explains why he chose more FASSI’s;
“We have been running Fassi cranes for some time now and we have always been happy with capabilities of the equipment. The Crane Centre provided exactly what we wanted and within a very tight deadline”
Buckhurst Plant Hire has depots located throughout the North West and Scotland and provides general plant and specialist equipment hire Nationwide. More information on Buckhurst can be found at; www.buckhurstplanthire.co.uk
CUT-UK select FASSI for new purpose-built site
Cutting Underwater Technologies have recently invested in a new FASSI F240BF.22 to coincide with their move to a new purpose built Headquarters. The F240BF.22 is a “fixed base” crane fitted with a V20 winch. As the crane is an Evolution, it also features a radio remote control as standard. It will lift 5,305kg @ 4.30m and 2,780kg @ 8.05m. Cut UK are based in Aberdeen and offer advanced research, development and operation of new technologies for deep-water engineering projects in support to offshore and maritime industries.
MC Transport add to their existing fleet
MC Transport of Tipton, West Midlands have recently put this Fassi F420BXP.23 Evolution to work.
The crane is fitted to a Scania 6x2 Rigid with a heavy duty cheesewedge body and is capable of lifting an impressive 12,000kg @ 3.15m. When extended, it will lift 3,840kg @ 10.05m.
Molson Coors take delivery of a new FASSI MICRO
Molson Coors Brewery have recently taken delivery of a new FASSI M25A.13. The crane also has a manual extension, which takes the maximum reach up to 5.75m, with a lifting performance of 415kg! When close in, the crane will lift 1,710kg @ 1.50m.
Hodson Crane Hire reach new heights with FASSI
Hodson Crane Hire has recently put this FASSI F455AXP.26 c/w L214 Fly Jib and V20 winch to work. The F455AXP.26 Evolution has continuous rotation and a lifting capacity of 1,895kg at 16.75m. When the L214 fly jib is attached the maximum reach jumps to an impressive 26.75m with a lift of 540kg!
The crane is just one part of the build, as this chassis also has a Moffett kit fitted to the rear, as well as a 6ft hydraulic load bearing rear push out, all supplied and fitted by The Crane Centre to company owner Gary’s exact specification. This, along with the V20 winch, Kinshofer pole grabs and Kinshofer Pallet forks, makes this a very unique & versatile vehicle. Visit Hodson Crane Hire website at www.hodsoncranehire.co.uk.
P H Lifting Services Prefer FASSI!
P. H. Lifting Services of Stockport, Cheshire have recently added a new Fassi to their fleet of lorry loader vehicles. The crane is a Fassi F660AXP.23 Evolution fitted to the rear of a Volvo FH12 440 8x4 Rigid. The Crane Centre also built the body to their exact specification, incorporating tool boxes, ladder storage, and a chain box in the front headboard.
P H Lifting Services now have six lorry loader vehicles in their fleet and all are looked after by The Crane Centre. Although they are based in the North-west, P H Lifting Services also offer nationwide transport and lifting.
Managing Director, Paul Hamlett tells us why he chose FASSI:
“The Fassi F660AXP.23 offers the best power to weight ratio than any other crane on the market, so it was the preferred choice. Since using the Fassi, I have found the remote to be very responsive and smooth and I love the fact that I can see the status of the Evolution operating system on the handset’s screen. Our customers expect top quality service, which we always provide. We expect the same from our suppliers and I am very happy with The Crane Centre’s service, they have never let me down”.
As with all Evolution cranes, the factory fitted remote control is a standard feature.
The F660AXP.23 will lift 14,420kg at 4.05m and 6,390kg at 9.40m.
J A Envirotanks of Birmingham invest in a new FASSI F560AXP.24 Evolution
The crane is fitted to a King extendable step frame trailer, powered by a Hatz silent pack engine.
J A Envirotanks specialise in enclosed bunded storage tanks for liquid products. The F560AXP.24 has a lifting capability of 12,655kg at 4.15m. Due to the dimensions and weights of the tanks, there was no margin for error in the specification of the crane and installation.
General Manager of J A Envirotanks, Simon Proctor tells us why he chose FASSI,
“We are very pleased with our Fassi F560AXP Vehicle mounted crane. The Fassi crane offered J A Envirotanks the best Lifting Capability against added payload. We are able to offload kerbside up to 50,000 litre capacity enclosed bunded fuel & oil tanks (9000 KG’s ), a complete turnkey solution for transport & plant operators as our Envirotanks are equipped with pipe work & pumps, & are normally in operation on the day of delivery. The Crane Centre have given J A Envirotanks excellent, professional service. With their programme of support & training, we were able to offer offloading to our customers within days of commissioning & training. It was very important to get the Crane to work on schedule & bring the added value service to our customer base”.
Jim Ricketts Hiab Haulage invest in FASSI
Jim Ricketts Haulage of Colwyn Bay in Conwy have Recently purchased a Fassi F600. Fitted to a Volvo original build 8 wheel rigid, the crane is capable of lifting 12,170kg close in at 4.35m and an impressive 2,820kg at 16.30m! The body was built by The Crane Centre to Jim’s exact specifications, with a 6ft hydraulic rear pull-out and stainless steel tool boxes.
Another service van to existing fleet
The Crane Centre has added another service van to their fleet in order to assist customers further with load testing and repairs. If you require any more information on any of our services, please visit our contacts page and contact the relevant person.
BPS choose top-seat FASSI
Barry Proctor Services of Stoke-on-Trent have recently purchased two new Fassi F95A.21’s fitted with top-seat controls, ideal for lifting pallets of bricks and blocks. The cranes are also fitted with Kinshofer KM331 brick grabs.
Bryn Thomas Crane Hire purchase best power to weight ratio
Bryn Thomas Crane Hire (UK) Ltd have recently invested in an F660AXP.26. The F660AXP has the best power to weight ratio in its class and will lift 3,100kg at 16.10m! Close in, it will lift 13,905 kg at 4.30m.
Central Electrical power-up with FASSI
Central Electrical of Knowsley in Merseyside have recently taken delivery of three new FASSI cranes. All three are fitted to Isuzu chassis’, two of the three are MICRO M20A.12, capable of lifting 1,700kg at 1.3m! The third crane is an F65A.21 with a lifting capacity of 1,160kg at 5.40m.
Highland Access go for FASSI
Highland Access of Trafford Park have recently taken delivery of a new FASSI F170A.22 to add to their existing hire fleet. The Crane is capable of lifting 3,720kg at 4.30m and 1,955 at 8.05m.
Royden Engineering see the wider picture with FASSI
Royden Engineering of Rainford, Merseyside, have recently purchased a FASSI F110A.22 fitted with stand-up controls. This option allows the operator to see a wider area without moving away from the crane, ensuring that visibility is always kept to a maximum.
Veolia Environmental Services take delivery of FASSI fabulous four
Veolia Environmental Services have recently taken delivery of 4 new FASSI F65A.21’s fitted to Volvo chassis’. The cranes, painted in Veolia’s colours, are capable of lifting 3,000kg @ 2.0m. When extended out, they will lift 1,160kg at a distance of 5.40m.
SGS UK Ltd become one of only two in Europe
SGS UK Ltd has recently purchased an F50A.23. The crane is fitted to the rear of their “Calibration trailer” (one of only two in Europe) and is powered by the trailer’s Donkey engine.
They will use the crane for lifting hose couplings and assemblies into place.
Silverstone Builders choose Fassi F110A.22
Silverstone Builders Merchants have just taken delivery of a FASSI F110A.22 fitted with stand up controls and a Kinshofer brick grab. The crane is mounted to the rear of the vehicle, enabling a larger working area of the crane. The F110A.22 is ideal for this application with a lifting performance of 1,325kg @ 7.9m!
Hallett Silberman choose FASSI evolution
Hallett Silberman of Birmingham have just purchased a Fassi F360DXP.24 evolution.
The crane, fitted to a Volvo 6x4 chassis, comes with factory fitted remote control as standard equipment and will lift 7,300kg at 4.50m and 2,480kg at 12.25m.
For more information regarding any of our services, please click on our Contact Us page or call us direct on 01270 753435.